Help! I Have A Construction Safety Audit

If you run or are involved in a construction site, youll probably have come across a Construction Safety Audit. These are essential to maintain the high levels of health and safety awareness demanded by the government. Most issues raised by a Construction Safety Audit are quite simple things that can be easily resolved. Here are some of the most common problems overlooked by a these inspection.

Site security is hugely important, as any unauthorised visitors to your site will almost certainly create damage or get themselves harmed. Warning signs arent simply for construction site workers. They must be displayed in the most obvious places, or ones that would deter any would-be trouble makers. Ladders must be lowered, and immediate access to higher levels of the site must be taken away. Usually, break-ins to construction sites take place in the dark. Therefore, any open holes must be covered, and drop offs protected.

You simply must store your materials and equipment properly. General order is important, as well as smaller considerations. You must make sure you deal with rubbish effectively. Waste disposal is very important, and spills should be deal with swiftly. Bear in mind, many spillages on construction sites will be of a flammable nature, and must be dealt with immediately.

And there, of course, there are fire extinguishers. Any Construction Safety Audit will require fire extinguishers to be properly placed, maintained and checked. All materials of a flammable nature should be stored and labeled properly. In the unfortunate event of a fire, the fire department number should be properly and regularly signposted throughout the site.

If your construction site has a confined space, which many do, you need to consider it carefully. In this situation, you will have to prove that you have trained everyone appropriately on health and safety. Remember you have a requirement to obtain and show the correct permits in many cases. You will also be aware of the necessity of a standby person. This person must have the appropriate training, and must be taking the appropriate precautions.

PPE (Personal Protective Equipment) rules should be adhered to at all times. This is the main cause of accidents on site. This will be assessed during your Construction Safety Audit. This means you will have to show that employees are trained in use of PPE, as well as being accomplished and certified. Every instance where PPE can be used, it should be used. Similarly, correct on-site sanitation and drinking water must be provided by any site. Failure to adhere to these rules will result in a Construction Safety Audit going badly for the entire site.

Fulfil all the requirements of an audit and you probably won’t have any accidents on your site. That’s what everyone involved wants, but sometimes accidents do just happen. Remember that these rules are here to help you, not hinder your work in any way. If you see something that goes against any health and safety issues, get in touch with your site manager quickly. Remember, one mistake, if considered severe enough, can close any site, which means you and your workmates will cannot work on the site.

Koi Pond – Liners Vs. Professional Construction

Why is there so much talk about pond liners? Which ones are UV protected, or stronger, or last longer? I am by no means an expert on liner technology, nor have I ever used them in my 29 years of designing and building waterfalls. If you’re a “liner guy” disciple, I’m sure you’re thinking, “Oh no, here he goes.” To tell the truth, I have been minding by own business for over two decades, just watching, reading and listening to all the “experts.”

I’ve listened to how “pond liners are simple to install,” and “pond liners are inexpensive compared to concrete and steel,” and “pond liners are quick to install.” Or “pond liners last for 50 years,” “pond liners bring higher profits to pond construction and waterfall construction,” and “liners don’t contaminate the water with alkali as does concrete construction.” Yes, I’ve almost sold myself on listening to the facts of the “experts.” Well, not quite, due to a few facts of my own.

So, a pond liner is guaranteed for 40 to 50 years? I would have to agree with that, as long as you leave it in its box the whole time. Too bad a liner manufacturer’s warranty doesn’t include damage from gophers, ground squirrels, chipmunks, rats or mice. Or tree, plant and weed roots. Or from stretching and punctures in the liner due to heavy rocks and other sharp objects. Startling fact: a puncture only the size of a pin hole can cause a pond to lose one drip per second, or 5 gallons in just 24 hours. That’s a pin hole, not a hole made by a pair of buck teeth on a burrowing mammal.

Imagine along with me for a minute: You have spent $350 on a pond design and then $8,000 of your hard-earned money for a pond and waterfall. This water feature is impressive. They dug a big hole, piled up some dirt at one end, draped a large rubber liner over the whole thing, and placed giant boulders all around the fish pond and on the dirt mound. Smaller rocks fill in between the boulder and additional rocks cover the liner in the pond. Now, it’s two years later and you’ve just come home from a two-week vacation to find the pond half empty (or half full, if you’re a positive person).

There must be a leak! How did this happen? Where is it? No problem, you think, I remember the salesman’s pitch: “If you should ever get a leak, just clean off the area around the hole, dry it off, and using the directions enclosed in the patching kit, apply this patching material.” But there’s only one problem: Where is the leak? or leaks? How do I find them? And if I do find them, and I’m successful in patching them up, what’s to keep it from leaking again?

Okay, I’m going to snap my fingers and you’ll wake up: “Snap!” Surprise! That was only a mental exercise with a happy ending. It wasn’t real. Or was it? Yes, it was. The short story you just heard was true. One out of every eight projects we do involves replacing the leaky liner for an angry fish pond/leaky liner owner.

Why am I finally speaking up now, after all these years and waterfalls and fish ponds? Because I’m angry, too! Not at the “liner guy” who sells the pond liners, but at his disciples around the country who are bragging how much money they make in just one or two days. I’m not upset at the fact that they make in two days what takes me six to seven days to make in constructing my fish ponds of rebar and 3000 psi concrete.

My ire stems from having to charge $8,000 to replace a $6,000 liner pond that lasted only two years. (A pond liner with padding didn’t stop a tree root which traveled 25 feet to do its destructive work.) For only an additional 16% in cost, that client could still be enjoying his original pond, stress-free, for his lifetime and that of his children and grandchildren and great-grandchildren.

The main features touted by pond liner promoters are simplicity, low cost, quick installation, and extremely high profits. In an article published in his catalog/magazine of liners and accessories, the “liner messiah” has obviously taught his disciples well, as you can read in this excerpt:

“If you hire us to install your pond, you get a choice of buying it with or without a stream. We offer no other choices! The pond we build covers an area of 11 by 16 feet, has a maximum depth of 2 feet, and a beautiful waterfall. We’ll build your pond in one day. The basic pond costs $5,100 and if you want to connect the falls with a stream, you’re looking at an extra $1,000. That’s it. End of story. No mas.”

That’s what Ernie Selles, president of Patio Ponds and disciple of the “liner guy,” said. Another quote from Ernie in the same catalog is, “I get out of bed every morning and look forward to going to work in a way that I never had before.” I noticed he didn’t mention how well he slept.

Let’s do the math on Ernie’s installation. The pond, stream, and waterfall cost is $6,100. The actual retail cost of the kit is only $1,000. $5,100 profit for only one day of labor. Notice: unlike our package, they offer no lights, no autofill, and the pond is only two feet deep. Yet three feet minimum are required for koi fish. A two foot pond affords no protection from predators such as raccoons and herons, and the shallow depth is affected easily by rapid temperature changes, causing undue stress on the pond’s inhabitants. They do not like to construct ponds over two feet deep, because they are more susceptible to cave-ins.

We would build the same pond with a depth ranging from 3 to 3 feet, with no shallows for dining predators. It is constructed of rebar 18 inches on center with a shell of 3000 psi concrete (sidewalks and driveways are typically 2000 psi). This 7 sack, 60% pea with fiber mix is so dense that it’s waterproof. However, we still coat it with ThoroSeal. The pond is equipped with two anti-vortex bottom suction drains, a skimmer to remove surface debris, and an out-of-pond pump that produces 5000 gallons per hour at only 2.6 amps, compared to the liner guy’s pumps which are only 4200 gallons per hour at 7.6 amps – over twice the cost of energy! In addition, you have to pull his heavy cast iron monster pump out of the water to clean out debris.

We would also include a state of the art Aqua Ultraviolet filter and UV light – the best money can buy. The liner guy’s filter needs to be disassembled in order to clean it by hand. The Ultima II filter requires the simple turn of a handle to back flush the debris. This system has been operational in my water features for nine years with no problems. We include an ultraviolet light in our system that kills the bacteria that create smells, kills pathogens that cause disease and algae spores that turn the water green. This light has a wiper arm that cleans the internal lens without the need to open the light.

We also offer an automatic electronic water level control system, the “AquaFill” by Aquamedia Corp.com that keeps the water level of the pond constant. Pond liner installers use floats that are mechanical like the float in a toilet tank. Mechanical fillers can corrode and stick, causing overflows and even poisoning the fish with excess chlorinated water. However, the AquaFill does not stick or corrode.

Not only are all our ponds designed a minimum of three feet deep, we build caves for the turtles and fish to hide in. With pond liner construction, rocks cannot be cemented to the liner and consequently many are loose, creating a hazard if someone were to step on them. Kids will be kids and I promise they will eventually be running up and down the falls. We have no loose rock because they are all cemented in place with Aquamedia Mortar Mix, which is not only three times stronger than regular mortar, it is very dense. As a result, alkali will not leach out into the water and create a pH problem. Regular mortar mix is porous and water passes through the joints of the rock, carrying with it cement residue. This in turn creates stain trails high in pH, easily poisoning the fish.

In conclusion, as an educated customer, would you pay $6,100 for a rubber pond liner or spend the same amount or a little more to get a shell made of concrete and steel that not only would never leak, but would last for decades. So what are we as contractors looking for? Exorbitant profits or peace of mind with long-term, happy clients?

It is more enjoyable for me to get a call eight years down the road from a content client than to get a complaint of a leaky pond. What does the “liner guy” disciple say? “Sorry, we only have a one year warranty”? Or do they go back and remove all the rocks, pull out the pond liner, clean it, repair the leaks, and replace all the rocks and equipment at no cost? Liners or professional installations?

If you say pond liners are professionally installed, then why is the very same liner kit sold to homeowners and do-it-yourselfers? The reason is, it doesn’t take an experienced professional to install one.

All you need is “a garden hose and a shovel”!

Look before you leap, and ponder before you weep. Happy koi, peace and joy.

Concrete Foundation Problems Salt Lake City Construction Company

While concrete foundations are standard in construction due to its versatility and ease of use, it can also lead to a slew of foundation problems. Some of these issues require only minor fixes, while others can involve the need to completely replace the foundation.

Exterior Indications of a foundation problem include:

* Doors that do not open or close properly
* Diagonal wall cracks at the corners of doors and windows
* Gaps at the corner of fascia trim
* Cracks in the exposed grade beam of the house
* Gaps between the garage door and the pavement
* Cracks in bricks and mortar
* Windows that are hard to open and close

Interior Indication of a foundation problem include:

* Large cracks in the concrete slab
* Unlevel floors
* Gaps above kitchen cabinets
* Diagonal wall cracks at the corners of doors and windows
* Curling and tearing of existing sheetrock repairs
* Leaks and cracks in and around the fireplace
* Cabinet doors that will not stay shut

The causes of foundation problems vary. Cold temperatures can freeze freshly poured foundation. This can cause reduced strength of the concrete. Older homes especially are susceptible to sinking concrete foundations. A repair of a sinking foundation is a large and involved job. If doors and windows within the home become misaligned, the foundation should be inspected.

Additionally with older homes, cracks in the foundation may be formed by settling. Settlement refers to a house foundation that has dropped below its original elevation. This can be caused by a loss of soil bearing capacity from compaction of fill, erosion, or loss of moisture. These cracks can amount to only minor, cosmetic issues, however should still be examined by a professional as a cracked foundation may be an unstable foundation that will only worsen over time.

Excess moisture can cause upheaval, which means the slab has risen above the original foundation elevation. The primary cause of this moisture is from leaky plumbing underneath the slab.

If you notice interior or exterior foundation problems, contact a qualified foundation repair contractor or structural engineer for an inspection and to discuss your options for repairs that may be required.

Salt Lake City Construction Company is a licensed and experienced foundation repair expert. We are a full service residential and commercial construction firm serving the Salt Lake City, Utah area and fully capable of taking on any project, repair, or renovation, regardless of size. Contact us today for a free consultation.

Heavy Machinery And Construction Site Accidents

Though construction accident numbers have declined over the past year, reports continue to roll out nationally and internationally regarding serious injuries or fatalities due to construction accidents. While many of these stories have involved workers in site-related accidents, such as building collapses, scaffolding failures, and falling from great heights, there seem to be an increasing number of reports of heavy equipment accidents.

Since construction projects, especially larger commercial and residential projects, typically use larger support structures and heavier building materials, heavy machinery is often used to expedite the process of moving and sometimes installing these materials. These machines pose a unique threat to the safety of construction worker, as there exist several possibilities of malfunction that could potentially cause a construction accident.

A few recent examples illustrate the potential hazards posed by heavy machinery. A skid steer, also known as a Bobcat or a front loader, is a common site on construction sites, being used to move large amounts of dirt or other heavy materials. Smaller than a backhoe or other earth-moving machines, it is a useful tool for larger construction sites. If used improperly, however, it puts the operator of the vehicle as well as those working around him in jeopardy. In three recent cases, these machines were responsible for serious injuries and in two cases a fatality.

In Alberta, Canada, two men were working excavating a basement when their skid steer toppled over and pinned them both to the floor. The men were soon rescued by emergency responders and taken to the hospital. In a tragic case here in the United States, a young boy who had gone to work with his father was killed when he fell out of his father’s lap while riding in a skid steer. Preliminary reports indicate that the child was thrown from the vehicle while his father backed up and was subsequently struck on the head by the large bucket full of dirt. In another accident involving a skid steer, a man fell seven stories inside one of the vehicles while participating in demolition work in Chicago.

These small and agile machines are most assuredly not the only vehicles involved in serious construction accidents. While not as common on smaller construction sites, cranes still play a significant role in assisting workers on the job with lifting heavy pieces of building material such as floor joists and beam supports. However, crane accidents also make up a large portion of construction accident statistics.

In a recent case in New York, a man was killed when the boom arm of a crane snapped off and crushed the operator as he was working on a bridge. Reports indicate that there is no clear reason at the moment as to what caused the boom to snap. Regardless, crane accidents could have any number of malfunctions. In international news, reports of a crane collapse which killed seven men as they worked on a rail line in India were released a few weeks ago.

Many of these workers injured in a construction site accident seek legal recourse as a method of compensation for their injuries. It is often advisable for any worker or family member of one who has been injured on a construction site to contact an experienced construction accident attorney to develop a construction accident lawsuit as soon as possible.

Preventing Injuries on a Construction Site

There are many ways to cut project costs in construction. One of the major expenses for any construction company is to pay for the proper level of workers compensation insurance. This cost can become considerable due to the high degree of accidents on a work site as well as the severity of the injury in relation to other industries. Construction work is one that is specialized and when a worker is injured, there may or may not be the ability for them to return to the job with accommodations for their injury. As such, preventing injuries on a construction site and the subsequent workers compensation claims becomes a significant concern for many site managers.

One of the most effective ways to reduce injuries and the workers comp claims is to properly maintain heavy equipment, tools and to visually inspect all scaffolding and ladders (both of which account for a high percentage of construction accidents annually). These regular practices alone cannot prevent all accidents, but they can reduce the chances of those that are preventable.

Another area which needs to be monitored is that of hazardous material clean up in the event of spills. This can be harmful to the workers on the site, the site itself and even the environment if this material soaks into the soil or enters waste water runoff. Regular training of all employees on proper handling, containment, clean up and disposal of these substances allows the company to reduce the chance of injury as well as to avoid fines for environmental damage due to the spill.

It is critical that every employee have the proper training to complete their tasks, from the initial groundbreaking to the final stages of construction site cleanup so that in the event that they are required to fill in for another employee, they will be able to do so. Companies need to provide the proper training for their employees to keep the risk of injury down.

Keeping with the need for regular training, construction companies should value those employees who work to maintain a safe environment and safe working pace. In today’s world of rushing and multi-tasking, there is great pressure to work fast and long. This practice simply produces fatigued workers who are more likely to make mistakes, thus potentially causing accidents, injuries and lost revenue for the company with lost time, delays, fines and an increase in their workman’s compensation coverage.